草榴社区 Cloud
Cloud native EDA tools & pre-optimized hardware platforms
Request a Free Trial →
About Universal Chiplet Interconnect Express
草榴社区 Verification IP (VIP) for Universal Chiplet Interconnect Express (UCIe) provides verification of design implementations based on latest UCIe specifications which can be used from IP to system level to accelerate verification closure. 草榴社区 VIP for UCIe enables verification for all topologies and at all signaling interfaces of a UCIe design: Flit aware Die-to-Die interface (FDI) between Protocol layer and Die to Die adapter, Raw Die-to-Die Interface (RDI) between Die-to-Die adapter and Physical layer, and Physical link interface between two dies - for single and multi-module chiplet setups. 草榴社区 VIP Test Suites, pre-built specification tied testcases, and SoC integration setups with IPs help accelerate your time to market with high quality deliverables.
Key Benefits
Native SystemVerilog/UVM
Source Code Test Suits Available
Built-in Protocol Checks
Complete Subsystem Verification Solution
Features
Highlights
- Native SystemVerilog/UVM
- Source code test
- Built-in protocol checks
- Verification plan and coverage
- 草榴社区 Verdi protocol-aware debug
- Runs on all major simulators
Category |
Feature |
Specification Version |
UCIe 1.0, 1.1 |
DUT Configuration |
Full Stack D2D Adapter PHY Protocol |
Protocol Mode |
Streaming Mode CXL over UCIe PCIe over UCIe |
Interface |
FDI RDI PHY Mainband and Sideband |
Package |
Standard (x16) Advanced (x32, x64) |
Module Configuration |
Single Module Multi Module |
Link Speeds |
Up to 32GT/s |
Link Width |
x16, x32, x64, x128, x256 |
RDI Shim Layer |
Interface to provide direct communication between US and DS RDI |
RDI API Interface |
To inject user-defined Sideband and Mainband packets at RDI interface (bypassing Die-to-Die Adapter and FDI) |
FDI/RDI Mainband Width |
16B, 32B, 64B, 128B, 256B |
FDI/RDI Sideband Width |
8 bits, 16 bits, 32 bits |
Registers |
Specification Defined registers (DVSEC, PHY/D2D, UHM) |
Passive Monitors |
FDI RDI Link D2D Adapter |
PHY Features |
Link Initialization and training Data, Clock and Track Lane repair Lane reversal Dynamic clock gating - Half rate and Quarter rate |
PHY Trainings |
Sideband training Mainband training Link Initialization PHYRETRAIN |
D2D Adapter Features |
Protocol and Parameter negotiation Arbitration and Muxing Retry CRC and parity computation |
VIP Features |
Individual Layer granularity Bypass LTSM states and sub-states Enable/Disable scrambler Configurable D2C training iteration and pattern count Control to send Sideband packets from protocol layer to protocol layer Debug Ports at each interface level |
Error Injection |
Transaction corruption using callback and exceptions Training pattern corruption at LTSM |
Resources
Support and Training
SolvNetPlus
Explore the 草榴社区 Support Community! Login is required.
SNUG
Erase boundaries and connect with the global community.
