草榴社区 Cloud
Cloud native EDA tools & pre-optimized hardware platforms
Request a Free Trial →
Creating Point of Care 3D Printing 草榴社区 with 3D LifePrints
Posted on 21 November 2022 by Kerim Genc
We are proud to work with , a UK & US company offering personalized surgical medical solutions that cover 3D printed anatomical models, virtual simulation, surgical guides and 3D implants across a spectrum of surgical disciplines. 草榴社区 Simpleware software has long been used by 3D LifePrints for segmenting and creating models from patient-specific imaging data, with the Point of Care (POC) 3D printing field representing a fast-growing industry. Our FDA 510(k) clearance for diagnostic 3D printing is helping 3D LifePrints to implement their reach in POC 3D printing, including via embedded clinical hubs, something that they have recently expanded to the United States with the opening of a facility at the Texas Medical Center in Houston.
Surgeon discussing 3D printed anatomical model (image courtesy of 3D LifePrints).
Patient-specific models are used for many different applications, from visualizing complex cases for communication and training, to planning surgeries and developing surgical guides. Hospitals and other clinical institutions benefit from reductions in operating theatre time, invasive surgeries, and the risk of further surgeries for patients.
Oncological Pre-Surgical Planning Use Cases
One of the key specialties for 3D LifePrints is in oncology surgery through their work at several leading NHS hospitals in the UK, where their engineers help surgical teams on difficult cases involving visualization of soft tissue and osteosarcoma, along with 3D surgical guides. We have recently selected two success stories of 3D LifePrints, covering a hemipelvectomy and a targeted resection of the ilium requiring a novel sterilizable surgical drill to be produced. In the first case, sterilizable surgical guides were created to assist in the partial removal of a patient’s left hemipelvis due to it being compromised by a tumorous mass. For the second case, a patient-specific sterilizable surgical guide was created to help a patient with a non-symptomatic Grade 1 chondrosarcoma requiring a targeted, bone-conserving resection to preserve the integrity of the ilium whilst ensuring that adequate margins were used.
3D printed model and surgical guide for targeted resection of ilium (left) and PI/II hemipelvectomy model (right).
In both cases, 3D LifePrints were able to satisfy the surgical request and clinical requirements by rapidly creating anatomical models and surgical guides, leading to:
- Improved patient communication
- Significant reduction in operating time
For the targeted resection of the ilium, the 3D LifePrints surgical guides had , according to Professor Tom Cosker, Consultant Orthopedic Surgeon at the Nuffield Orthopedic Center NHS, Oxford, UK: "The presence of the guide allows more accurate localisation of the tumor meaning that the operative exposure is less; the risk of damaging nearby structures is less (which also has the knock on effect of reducing post surgical complications and therefore litigation) and the tumour resection is more precise. As the exposure is less patients, they should recover quicker and therefore should go home quicker. Surgical time is reduced meaning that an additional case can potentially be added to the list. The return to theater rate for a positive margin (where the tumor has been incompletely resected) should be less."
Learn More
- See more use cases carried out by
- Read about Simpleware software for Point of Care 3D Printing
Any Questions?
Do you have any questions about Simpleware software or need additional information? Our technical specialists will be happy to show you Simpleware software solutions for any anatomy.