草榴社区 Enhanced Universal DDR Protocol Controller (uPCTL2)
The 草榴社区 Enhanced Universal Protocol Controller (uPCTL2) is fully configurable protocol controller that allows designers to generate a DDR interface that is optimized for latency, bandwidth, and area. The configurable uPCTL2 allows for the generation of DDR controllers that meet or exceed the requirements of designs ranging from high-performance networking to low-power, cost-sensitive mobile products. uPCTL2 supports the JEDEC standard DDR4, DDR3, DDR2, LPDDR4, LPDDR3, LPDDR2, and LPDDR/mobile DDR SDRAMs.
The 草榴社区 Enhanced Universal DDR Protocol Controller (uPCTL2) serves the memory control needs of applications where memory scheduling is done on the host side or interconnect by an external scheduler. This advanced protocol controller accepts memory access requests from a single application-side host port using AMBA (AXI4, AXI) bus interfaces or 草榴社区’ custom defined host interface H-IF for single-port ultra low latency configurations.
The uPCTL2’s low-power features make it useful in power-sensitive designs, and uPCTL2’s reliability, availability, and serviceability (RAS) features meet the needs of the most demanding enterprise systems.
The uPCTL2 connects to DDR PHYs via a DFI interface to create a complete memory interface and control solution. The controller includes software configuration registers, which are accessed through an AMBA APB interface.
草榴社区 DDR Complete Solution Datasheet 草榴社区 Enhanced Universal DDR Memory and Protocol Controller IP Datasheet
- Join your own scheduler to a single-port enhanced Universal Protocol Controller
- Support for JEDEC standard DDR2, DDR3, DDR4, LPDDR/Mobile DDR, LPDDR2, LPDDR3 and LPDDR4 SDRAMs
- Compatible with all 草榴社区 DDR PHYs (excluding DDR2/DDR PHYs)
- DFI 4.0, DFI 3.1 or DFI 2.1 compliant interface to DDR PHY (DFI 3.1 is backward compatible with DFI 2.1)
- Boot-time programmable frequency ratio
- Data rates up to 3200 Mbps in 1:2 frequency ratio, using an 800 MHz controller clock and 1600 MHz memory clock (Dependent on process and PHY chosen)
- Data rates up to 1600 Mbps in 1:1 frequency ratio, using an 800 MHz controller clock and 800 MHz memory clock (Dependent on process and PHY chosen)
| Description: | DDR Enhanced Protocol Controller (uPCTL2) supporting DDR4, DDR3, DDR2, LPDDR4, LPDDR3, and LPDDR2 |
| Name: | dwc_ddr_upctl2 |
| Version: | 3.91a |
| ECCN: | 3E991/NLR |
| STARs: | Open and/or Closed STARs |
| myDesignWare: | Unsubscribe |
| Product Type: | DesignWare Cores |
| Documentation: | |
| Toolsets: | Qualified Toolsets |
| Download: | dw_iip_DWC_ddr_umctl2 |
| Product Code: | B624-0 |