草榴社区

MATLAB DSP Algorithms for Offline Signal Recovery and BER Counting

Tool Used: OptSim

MATLAB is often used for coherent receiver DSP algorithm research and development. In these application notes the signal after the photo-detector and the TIA is saved to a file and then processed offline with the MATLAB DSP algorithm scripts. This is the workflow typically adopted in the industry and OptSim and OptSim Circuit can seamlessly fit in.

All the MATLAB scripts are located in the directory named MATLAB included in the project directory. As a quick overview of this capability, consider a coherent system as described below: The data rate of the systems under consideration is 32 GBd and the number of symbol transmitted is 217 = 131072 bits. OptSim saves the signal directly to a MATLAB workspace file using the OptSim Compound Component for MATLAB (CCM).

The constant modulus algorithm (CMA) and Viterbi-Viterbi algorithm are used for polarization de-multiplexing and phase recovery. Once the signal is recovered the performance is estimated by doing BER counting.

The MATLAB DSP scripts return several types of information to the user. Figures 1 to 7 show the produced charts containing visual information about the characteristics of the signal before and after various stages of DSP processing. In addition the scripts perform BER counting on the recovered signal and return the BER for each individual bit stream as well as the final average BER.

Scattering diagram after CMA for X and Y polarization | 草榴社区

Figure 1. Scattering diagram after CMA for X and Y polarization

Phase error after Viterbi-Viterbi phase recovery for X and Y polarization | 草榴社区

Figure 2. Phase error after Viterbi-Viterbi phase recovery for X and Y polarization

Total number of errors versus symbol number | 草榴社区
Total number of errors versus symbol number | 草榴社区

Figure 3. Total number of errors versus symbol number

Scattering diagram after Viterbi-Viterbi for X and Y polarization | 草榴社区

Figure 4. Scattering diagram after Viterbi-Viterbi for X and Y polarization

CloudPlot after Viterbi-Viterbi for X and Y polarization | 草榴社区

Figure 5. CloudPlot after Viterbi-Viterbi for X and Y polarization

FIR filter transfer function and impulse response | 草榴社区

Figure 6. FIR filter transfer function and impulse response

Signal and errors scattering diagram and OSNR for X and Y polarization | 草榴社区

Figure 7. Signal and errors scattering diagram and OSNR for X and Y polarization